Agilent Technologies E6380-90073 manual CDANalyzerCPOWer meas cmnd CDANanlyzerCPOWer?

GPIB Command Dictionary

MEASure subsystem

:CDANalyzer:CPOWer <meas cmnd> :CDANanlyzer:CPOWer?

IS-95 Only mode. These command set/query the channel power measurement.

This measurement utilizes the Number Measurement Syntax, but does not use the :METer command.

Syntax

MEAS:CDAN:CPOW <meas cmd>

!See “Number Measurement Syntax” on page 283. MEAS:CDAN:CPOW?

Screen/field equivalent

MEAS:CDAN:CPOW? reads the ChPwr measurement field on the CD Setup menu of the CODE DOM screen when the CDMA standard is set to “IS-95 Only”.

:CDANalyzer:ERRor:FREQuency <meas cmnd> :CDANalyzer:ERRor:FREQuency?

IS-95 Only mode. These commands set/query the frequency error measurement on the code domain analyzer.

This measurement utilizes the Number Measurement Syntax, but does not use the :METer command.

Syntax

MEAS:CDAN:ERR:FREQ <meas cmd>

!See “Number Measurement Syntax” on page 283. MEAS:CDAN:ERR:FREQ?

Example

MEAS:CDAN:ERR:FREQ?

Screen/field equivalent

MEAS:CDAN:ERR:FREQ? reads the Freq Err measurement field on the CODE DOM screen when the CDMA standard is set to “IS-95 Only”.

Chapter 1 227