Agilent Technologies E6380-90073 manual CDANalyzerERHo?

GPIB Command Dictionary

MEASure subsystem

:CDANalyzer:ERHo?

IS-95 Only mode. This command queries the estimated rho measurement. Estimated rho is an approximation of rho that is calculated without taking the system out of service.

Syntax

MEAS:CDAN:ERH?

Screen/field equivalent

MEAS:CDAN:ERH? queries the Est Rho field CODE DOM screen when the CDMA standard is set to “IS-95 Only”.

:CDANalyzer:MARKer:APOWer <meas cmnd> :CDANalyzer:MARKer:APOWer?

IS-95 Only mode. These commands set/query the absolute power measurement.

This measurement utilizes the Number Measurement Syntax, but does not use the :METer command.

Syntax

MEAS:CDAN:MARK:APOW <meas cmd>

!See “Number Measurement Syntax” on page 283. MEAS:CDAN:MARK:APOW?

Example

MEAS:CDAN:MARK:APOW?

Screen/field equivalent

MEAS:CDAN:MARK:APOW? reads the Lvl field on the Marker menu of the CODE DOM screen when power (or fast power) measurement is selected and the Ch pwr unit field on the CD Setup menu is set to Abs. This applies when the CDMA standard is set to “IS-95 Only”.

228 Chapter 1