
GPIB Command Dictionary
AFG2ENCoder subsystem
:SEND
This command sends the encoder data stream.
Syntax
AFG2:SEND
Screen/field equivalent
AFG2:SEND controls the Send field on the SIGNALING ENCODER screen when the Mode field is set to
:STOP
This command stops the data stream that is being output when
AFG2:SEND:MODE is ‘Cont’ or ‘Burst’.
Syntax
AFG2:STOP
Screen/field equivalent
AFG2:STOP controls the Stop field on the SIGNALING ENCODER screen when the Mode field is set to
74 | Chapter 1 |