InstallingtheBattery

ToinstalltheLi-Ionbattery:

To install, insert the battery into the opening on the back of the phone (1) and gently press down until the latch snaps into place (2).

RemovingtheBattery

WARNING: Do not handle a damaged or leaking Li-Ion battery as you can be burned.

Toremoveyourbattery:

1.Make sure the power is off so that you don’t lose any stored numbers or messages.

2.Push and slide the cover upward until it comes free from the phone.

3.Hold the phone in one hand so that the battery is facing you.

4.Using two fingernails, hook the top edge of the battery (as shown in the photograph), and push down while pulling out on the battery to remove it from the phone.

20 Section 2A: Your Phone – The Basics

Page 32
Image 32
Sprint Nextel LX160 manual InstallingtheBattery, RemovingtheBattery, ToinstalltheLi-Ionbattery, Toremoveyourbattery