UsingVoice-Activated Dialing
In addition to SprintVoice Command (see page 155), you can use a voice dial tag to automatically dial a phone number in your Contacts. (A voice dial tag is a command you record and use to place calls without using the keypad.) Your phone can store up to 30 voice dial tags.
ProgrammingVoice DialTags
To program a voice dial tag:
1.Press Menu>VoiceServices>VoiceDial.
2.Select <RecordNew>and press .
3.Enter or highlight the entry (name) in the Contacts and press .
Tip: If an entry has more than one number, press the navigation key right or left to select the desired number, and then press OK.
4.After you are prompted to say the name you wish to program, wait for the beep and then say the name into your phone’s microphone.
5.Respond to the prompt by repeating the name after the beep.
Voice Services
Section 2H: Using Your Phone’s Voice Services | 101 |