TurningYour Phone On and Off

TurningYourPhoneOn

Toturnyourphoneon:

Press and hold for approximately two seconds.

Once your phone is on, it may display “Looking for Service,” which indicates that your phone is searching for a signal. When your phone finds a signal, it automatically enters standby mode – the phone’s idle state. At this point, you are ready to begin making and receiving calls.

If your phone is unable to find a signal after 15 minutes of searching, a Power Save feature is automatically activated. When a signal is found, your phone automatically returns to standby mode.

In Power Save mode, your phone searches for a signal periodically without your intervention. You can also initiate a search for Sprint Service by pressing any key (when your phone is turned on).

Tip: The Power Save feature helps to conserve your battery power when you are in an area where there is no signal.

TurningYourPhoneOff

Toturnyourphoneoff:

Press and hold for two seconds until you see the powering-down animation on the display screen.

Your screen remains blank while your phone is off (unless the battery is charging).

18 Section 2A: Your Phone – The Basics

Page 30
Image 30
Sprint Nextel LX160 manual TurningYour Phone On and Off, TurningYourPhoneOn, TurningYourPhoneOff, Toturnyourphoneon