![](/images/new-backgrounds/1182399/18239965x1.webp)
| Safety Considerations for this |
| Instrument |
| SAFETY EARTH GROUND |
| A uninterruptible safety earth ground must be provided from the main |
| power source to the product input wiring terminals, power cord, or |
| supplied power cord set. |
| CHASSIS GROUND TERMINAL |
| To prevent a potential shock hazard, always connect the |
| chassis ground terminal to earth ground when operating this |
| instrument from a dc power source. |
| This product is a Safety Class I instrument (provided with a |
WARNING | |
| protective earthing ground incorporated in the power cord). |
! | The mains plug shall only be inserted in a socket outlet |
provided with a protective earth contact. Any interruption of | |
| the protective conductor inside or outside of the product is |
| likely to make the product dangerous. Intentional interruption |
| is prohibited. |
!
!
This product is not intended for use in wet or damp environments. Do not expose this product to excessive moisture. Operate this product only within the temperature and humidity ranges specified in the user’s manual.
This instrument is equipped with internal ground fault circuit interrupter class A.
•This device does not protect against electrical shock due to contact with both circuit conductors or a fault in supply wiring to product.
•Do not use extension cord to connect this product to power receptacle.
•Replace cordset only with Agilent Technologies 8120 series. Attention - Remplacer uniquement par un cordon amovible numero 8120.
•Do not use in wet location. Ne pas utiliser dans un emplacement mouille.
33