Inspection Upon Delivery
Carefully unpack and inspect the Thermax CP3 and be sure all components ordered are included. Orders might be packed in more than one box.
NOTE: Contact the carrier immediately regarding any damage incurred during shipping as it is your responsibility to file a damage claim with the carrier.
Important Safety Information
1)To prevent the possibility of electrical shock, always unplug the system from the main power source before physically inspecting or attempting to repair the system.
2)Inspect system daily, especially when used by someone else. Inspect for damaged components such as loose wires, frayed cords, missing ground pin, etc.
3)Only operate system when it is properly grounded. Improper grounding could result in serious or fatal shock!
4)When operating the system around water, during flood restoration, etc., always outfit yourself properly with
5)To keep from voiding your warranty, use only those cleaning solutions manufactured by Thermax and never use solvent based products.
6)After use, always thoroughly rinse and clean both recovery and solution tanks. If using recovery tank to store hoses, or other miscellaneous items, always clean items before storing them in tanks.
7)Do not operate solution pump dry.
8)Do not store where temperatures drop below freezing, as this may damage the pump.
9)Always use defoamer in recovery tank to prevent the motor from being damaged from overfoaming.
10)Extension cord should have a minimum rating of 12/3 (#12 cord). Extension cord should not exceed 50 feet.
11)Never open up the system when there is water in either the solution or recovery tank, remove the solution and waste water first.
4
