GPIB Command Dictionary
MEASure subsystem
:OSCilloscope:TRACe?
This command returns an array of 417 real values, corresponding to points on the oscilloscope’s display. 0 corresponds to the first value (left side of trace display) and 416 is the last value (right side of the trace display).
Syntax
MEAS:OSC:TRAC?
Screen/field equivalent
MEAS:OSC:TRAC has no corresponding field on the SCOPE screen.
:RFRequency:SELect <string> :RFRequency:SELect?
These commands set/query the RF measurements for the RF analyzer.
Syntax
MEAS:RFR:SEL <meas cmd>
!See “Number Measurement Syntax” on page 283. MEAS:RFR:SEL?
Example
MEAS:RFR:SEL ‘Frequency’
‘Freq Error’
MEAS:RFR:SEL?
Screen/field equivalent
MEAS:RFR:SEL selects which measurement, Frequency or Freq Error is displayed the RF ANALYZER screen. These measurements are also displayed on the RF GENERATOR and AF ANALYZER screens.
Chapter 1 | 275 |
