GPIB Command Dictionary
CDANalyzer subsystem
:IS2000:GAIN[:SETTing] <string> :IS2000:GAIN[:SETTing]?
For
This command may conflict with the CDMA analyzer’s settings CAN:PATH:GAIN and CAN:PATH:MODE. For example, if autoranging is turned off (‘Hold’) in the CDMA analyzer and turned on in the Code Domain Analyzer (‘Auto’), the ‘Hold’ setting will always override the ‘Auto’ setting. When autoranging is turned off, setting either analyzer’s gain will automatically change the other’s to the same setting.
Use the CAN:POW:GAIN command when making an average power measurement.
Syntax
CDAN:IS2000:GAIN[:SETT] ‘0 dB’ ‘6 dB’ ‘12 dB’ ‘18 dB’ ‘24 dB’ ‘30 dB’ ‘36 dB’
CDAN:IS2000:GAIN[:SETT]?
Screen/field equivalent
CDAN:IS2000:GAIN[:SETT] sets the lower subfield of the Gain image of the CODE DOMAIN screen. This subfield can only be set when the upper subfield is set to Hold when the CDMA standard is set to
Chapter 1 | 133 |
