GPIB Command Dictionary
STATus
STATus
The STATus subsystem reports many of the modes of the Test Set, including the states. These commands do not correspond to fields in specific screens. For detailed information about status registers, see “Status Reporting” in the Advanced Operations chapter of the Test Set’s Programmer’s Guide.
:PRESet
This command presets the Test Set.
Syntax
STAT:PRES
:CALibration:CONDition?
This command queries the state of the calibration.
This query returns an integer value.
Syntax
STAT:CAL:COND?
:CALibration:ENABle
:CALibration:ENABle?
This command enables the calibration.
This query returns an integer value.
Syntax
STAT:CAL:ENAB
STAT:CAL:ENAB?
:CALibration[:EVENt]?
This command queries the state of the event.
Syntax
STAT:CAL[:EVEN]?
336 | Chapter 1 |
