Pioneer VSX-41 Direct function, Confirming preset codes, Controlling the rest of your system

Models: VSX-41

1 72
Download 72 pages 20.23 Kb
Page 51
Image 51
Direct function

Controlling the rest of your system

Direct function

• Default setting: ON

You can use the direct function feature to control one component using the remote control while at the same time, using your receiver to playback a different component. This could let you, for example, use the remote control to set up and listen to a CD on the receiver and then use the remote control to rewind a tape in your VCR while you continue to listen to your CD player.

When direct function is on, any component you select (using the MULTI CONTROL buttons ) will be selected by both the receiver and the remote control. When you turn direct function off, you can operate the remote control without affecting the receiver.

1Press REMOTE SETUP and hold for three seconds.

The LCD display shows SETUP.

2Press the MULTI CONTROL button for the component you want to control.

3Use } and ] to select DIR SET then press REMOTE SETUP.

The LCD on the remote displays the component you want to control.

4Use the number buttons to enter either 9990 (direct on) or 9995 (direct off).

The LCD will display OK to show the four digit code has been accepted.

You can’t use direct function for TV INPUT.

09

Confirming preset codes

Use this feature to check which preset code is assigned to a MULTI CONTROL button.

1Press REMOTE SETUP and hold for three seconds.

The LCD display shows SETUP.

2Press the MULTI CONTROL button of the component for which you want to check the preset code.

3Use } and ] to select READ ID and then press REMOTE SETUP.

The preset code appears in the display for two seconds.

51

En

Page 51
Image 51
Pioneer VSX-41 manual Direct function, Confirming preset codes, Controlling the rest of your system