04Controls and Displays
2DIGITAL
Lights when a Dolby Digital signal is detected.
ANALOG
Lights when an analog signal is detected.
DTS
Lights when a source with DTS audio signals is detected.
2 DTS
When the Standard mode of the receiver is on, this lights to indicate decoding of a DTS signal.
3 2 DIGITAL
When the Standard mode of the receiver is on, this lights to indicate decoding of a Dolby Digital signal.
4 2 PRO LOGIC II
When the Standard mode of the receiver is on, this lights to indicate Pro Logic II decoding.
5 ATT
Lights when INPUT ATT is used to attenuate (reduce) the level of the analog input signal.
6
Lights when
7 DIRECT
Lights when source direct playback is in use. This function bypasses all tone, balance, Advanced Surround, and Dolby Surround effects.
8 MIDNIGHT
Lights during Midnight listening.
9 MONITOR
Lights when MONITOR is selected (page 46).
10 Speaker indicator
Shows the speaker system currently in use.
11Character display
12Neo:6
Lights during NEO:6 processing
13ADV. SURR (Advanced Surround) Lights when one of the Advanced Surround modes has been selected.
14LOUDNESS
Lights when LOUDNESS has been selected.
15 TUNER indicators
STEREO:
Lights when a stereo FM broadcast is being received in auto stereo mode.
MONO:
Lights when the mono mode is set using the
MPX button.
TUNED:
Lights when a broadcast is being received.
16 Master volume level
Shows the overall volume level.
Depending on your level settings for each channel, the maximum level can range between
26
En