025 minute guide
Using the Quick Setup
You can use the Quick Setup to get your system up and running with just a few button presses. The receiver automatically makes the necessary settings after you have selected your speaker setup and room size. If you want to make more specific settings, refer to Choosing your receiver setup on pages
|
|
|
|
|
|
|
| AUDIO/VIDEO | |
|
|
|
|
|
|
|
|
| INPUT |
|
|
|
|
|
|
|
| MULTI JOG | SELECTOR |
|
|
|
|
|
|
|
| ENTER |
|
|
|
|
|
|
|
|
|
| MASTER VOLUME |
ADVANCED | STEREO/ | SIGNAL | MIDNIGHT/ |
| MONITOR | TONE | QUICK | SETUP |
|
SURROUND | DIRECT | SELECT | LOUDNESS | SPEAKERS |
| ||||
|
|
|
|
|
|
|
| DOWN | UP |
LISTENING MODE |
|
|
|
|
| MULTI JOG |
|
| |
|
|
|
|
| VIDEO INPUT |
|
|
| |
FL DIMMER |
|
|
|
|
|
|
|
|
|
|
|
| DIGITAL IN | VIDEO | L | AUDIO | R |
|
Check the table below to find the speaker setup that corresponds with your system.
1If the receiver is off, press STANDBY/ ON to turn the power on.
The STANDBY indicator goes out.
2Press QUICK SETUP.
The display prompts you to select your speaker setup.
3Use the MULTI JOG/INPUT SELECTOR dial to choose your speaker setup.
Cycle between the following choices:
|
| 3.0ch |
|
| 3.1ch |
|
|
| 4.0ch |
|
| ||
|
|
|
|
|
|
|
| ||||||
|
|
|
|
|
|
|
|
|
|
| |||
7.1ch |
|
|
|
|
| 4.1ch | |||||||
|
|
|
|
|
|
|
| ||||||
|
|
|
|
|
|
|
|
| |||||
7.0ch |
|
|
|
|
| 5.0ch | |||||||
|
| 6.1ch |
|
|
| 6.0ch |
|
|
| 5.1ch |
|
| |
|
|
|
|
|
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
12
En
4 Press ENTER.
The display prompts you to select your room size.
5Use the MULTI JOG/INPUT SELECTOR dial to choose your room size. Depending on the distance of your speakers from the listening position, choose between Small, Medium, or Large (see table below).
| S | M | L |
|
|
|
|
Front | 12 ft. | 12 ft. | 12 ft. |
|
|
|
|
Center | 10 ft. | 10 ft. | 10 ft. |
Surround | 6 ft. | 7 ft. | 9 ft. |
Surround Back | 3 ft. | 5 ft. | 7 ft. |
6Press ENTER to confirm your setup. The display shows the speaker setup and room size that you have selected.