Link to Cell
connection from other Bluetooth devices (cellular phone or headset). To automatically resume the connection to cellular phones, leave the auto connection on.
RSome cellular phones lose connection after usage, please check the specifications of your cellular phone for more details.
Handset
1MMENUN#632
2MbN: Select the desired setting.
3 MSAVEN a MOFFN
Note:
RSome cellular phones may ask you if you accept the connection requirement from the base unit. In that case, select “Off” in step 2. Check the specifications of your cellular phone.
Connecting/disconnecting the cellular phone manually
If you will not be using the paired cellular phone’s link to cell feature temporarily (for example, you do not want the unit to ring when your cellular line receives a call), you can disconnect your cellular phone from the base unit. If you want to use it again, reconnect the cellular phone to the base unit.
Note:
REven if a paired cellular phone was disconnected from the base unit, if it is brought within the base unit’s range during the auto connection interval, it may automatically connect to the base unit (page 15).
RA disconnected cellular phone is not unpaired from the base unit, so pairing it to the base unit again is unnecessary.
Handset
1To connect/disconnect:
For CELL 1: MMENUN#6251
For CELL 2: MMENUN#6252 R A long beep sounds.
2MOFFN
Cellular line only mode (If you do not use the landline)
If you do not use the landline, we recommend setting the unit to the cellular line only mode.
Important:
RIf you turn on the “Cell line only mode”, disconnect the telephone line cord from the base unit. Otherwise the “Cell line only mode” cannot be activated.
Handset
1MMENUN#157
2To turn on:
MbN: “On” a MSELECTN a
MbN: “Yes” a MSELECTN
To turn off:
MbN: “Off” a MSELECTN
Note:
ROnce you set this mode, you can use the following buttons to make cellular calls:
–for the handset, press M
N or MZN instead of MCELLN (page 18).
–for the base unit, press MZN instead of the line button (MCELL 1N or MCELL 2N) set for the cellular line selection (page 17, 24).
ROnce you set this mode, the following features cannot be used:
–Landline features (page 37)
–Answering system (page 48) Messages cannot be received.
–Voice mail features (page 55)
RAfter this mode is turned on or off, the base unit reboots.
–Bluetooth connections from cellular phones or headset are disconnected. If the auto connection is turned on (page 15), the cellular phones are reconnected.
–
will be displayed on the handset momentarily. The handset can be used
once 
is displayed.
When you use the landline again
Before connecting the telephone line to the base unit, select “Off” in step 2, “Cellular line
16
TG7841BX_UE(en)_0528_ver011.pdf 16
2013/05/28 18:56:47
