Shared Phonebook
4MbN: Select the desired entry.
5To make a cellular/landline call, continue from step 3 for handset or step 3 for base unit, “Scrolling through all entries”, page 28.
Editing entries
Handset
1Find the desired entry (page 28).
2MMENUN a MbN: “Edit” a MSELECTN
3Edit the name if necessary (16 characters max.; page 27). a MOKN
4Edit the phone number if necessary (24 digits max.). a MOKN
5MbN: Select the desired group (page 27). a MSELECTN 2 times
6MOFFN
Erasing entries
Erasing an entry
Handset
1Find the desired entry (page 28).
2MMENUN a MbN: “Erase” a MSELECTN
3 MbN: “Yes” a MSELECTN 4 MOFFN
Base unit
1Find the desired entry (page 28).
2MERASEN a MbN: “Yes” a MSELECTN
3 MEXITN
Erasing all entries in a group
Handset
1MFN 
a MMENUN
2MbN: “Erase all” a MSELECTN
3MbN: Select the desired group. a
MSELECTN
4MbN: “Yes” a MSELECTN
5MbN: “Yes” a MSELECTN
6 MOFFN
Base unit
1M
N a MERASEN
2MbN: Select the desired group. a
MSELECTN
3MbN: “Yes” a MSELECTN
4 MbN: “Yes” a MSELECTN
Chain dial
This feature allows you to dial phone numbers in the phonebook while you are on a call. This feature can be used, for example, to dial a calling card access number or bank account PIN that you have stored in the phonebook, without having to dial manually.
Handset / Base unit
1Proceed with the operation for your unit. During an outside call:
Handset: MMENUN a MbN:
“Phonebook” a MSELECTN Base unit: M
N
2MbN: Select the desired entry.
3Press MCALLN to dial the number.
Note:
RWhen storing a calling card access number and your PIN in the phonebook as one phonebook entry, press MDN (Pause) to add pauses after the number and PIN as necessary (page 19).
RIf you have rotary/pulse service, you need to press * (TONE) before pressing MMENUN on the handset or M
N on the base unit in step 1 to change the dialing mode temporarily to tone. When adding entries to the phonebook, we recommend adding * (TONE) to the beginning of phone numbers you wish to chain dial (page 27).
29
TG7841BX_UE(en)_0528_ver011.pdf 29
2013/05/28 18:56:48
