Panasonic KX-TG7841BX Handset noise reduction, Flash for landline calls, Caller ID service users

Making/Answering Calls Using the Handset

Press M N.	1 Press MCALL WAITN to answer the 2nd
R The base unit user can take the call by		call.
pressing MZN.		2 To switch between calls, press MCALL
Note:		WAITN.
R If a call is kept on hold for more than 9		Note:
minutes, an alarm tone starts to sound.
		R Please contact your service provider/
After 1 additional minute on hold, the call is
		telephone company for details and
disconnected.
		availability of this service in your area.
R If another phone is connected to the same
line, you can also take the landline call by
lifting its handset.	Temporary tone dialing for
	landline calls (for rotary/pulse
Mute
		service users)
While mute is turned on, you can hear the
		You can temporarily switch the dialing mode
other party, but the other party cannot hear
		to tone when you need to access touch-tone
you.
		services (for example, answering services,
1 Press MMUTEN during conversation.
		telephone banking services, etc.).
R MMUTEN flashes.		Press * (TONE) before entering access
2 To return to the conversation, press		numbers which require tone dialing.
MMUTEN again.
Note:	Handset noise reduction
R MMUTEN is a soft key visible on the display	This feature allows you to hear the voice of
during a call.
		the person you are talking to clearly, by
		reducing the surrounding noise coming from
Flash for landline calls		the other party’s telephone.
MFLASHN allows you to use the special		Press MNOISE REDUCTIONN to turn on/off
		while talking.
features of your host PBX such as transferring		Note:
an extension call, or accessing optional
		R When this feature is turned on,		is
telephone services.
Note:		displayed while talking.
		R Depending on the environment where this
R To change the flash time, see page 35.
		handset is being used, this feature may not
		be effective.
For call waiting or Call Waiting		R This feature is not available using the
		speakerphone.	” setting and
Caller ID service users		R When both the “
		Equalizer
To use call waiting or Call Waiting Caller ID,		noise reduction are activated,		is
		shown on the display.
you must first subscribe with your service
provider/telephone company.
This feature allows you to receive calls while	Handset equalizer
you are already talking on the phone. If you	This feature clarifies the voice of the person
receive a call while on the phone, you will hear
a call waiting tone.		you are talking to, producing a more
If you subscribe to both Caller ID and Call		natural-sounding voice that is easier to hear
Waiting with Caller ID services, the 2nd		and understand.
caller’s information is displayed after you hear		1 Press MMENUN while talking.
the call waiting tone on the handset.	2 MbN: “Equalizer” a MSELECTN

20

TG7841BX_UE(en)_0528_ver011.pdf 20

2013/05/28 18:56:47