Link to Cell
Link to cell settings
Selecting which unit receives cellular calls
You can select which unit rings and receives calls for a cellular line. When “All” is selected, the handset and the base unit ring.
Handset
1For CELL 1: MMENUN#6271
For CELL 2: MMENUN#6272
2MbN: Select the handset or “All”. a
MSAVEN
3MOFFN
Note:
RWhen you select the handset to receive calls for a cellular line the base unit can answer the calls even though it does not ring. However, you can make the base unit ring by adjusting the base unit ringer volume (page 33).
RWhen you change the setting to “All”, the base unit ringer volume also returns to the lowest level even if the ringer volume has been changed.
Ring as cell mode
Once this feature is turned on, the handset and base unit ring using the same ringer tone as your cellular phone.
The following settings are available:
–“Off”: Turn this feature off to use the ringer tones of the handset and base unit. Caller information is announced depending on the Talking Caller ID setting (page 35).
–“On (with Talking CID)” (default): The handset and base unit use your cellular phone’s ringer tone. Caller information is announced even if the Talking Caller ID is turned off.
–“On (without Talking CID)”: The handset and base unit use your cellular phone’s ringer tone. Caller information is not announced even if the Talking Caller ID is turned on.
Important:
RTo use this feature, your cellular phone must support Bluetooth
Handset
1For CELL 1: MMENUN#6141
For CELL 2: MMENUN#6142
2MbN: Select the desired setting.
3 MSAVEN a MOFFN
Note:
RThe units use the preset ringer tones (page 34) instead of your cellular phone’s ringer tone when a cellular call is being received if:
–your cellular phone is in night mode (depending on your cellular phone).
–the base unit is in use.
RIf your cellular phone is in night mode with “On (with Talking CID)” set, the unit announces caller information even when Talking Caller ID is turned off (page 35).
To use the handset ringer tone instead of your cellular phone’s ringer tone
Select “Off” in step 2, “Ring as cell mode”, page 15.
To change the handset ringer tone for a cellular line, see page 33.
Auto connection to the cellular phone
After pairing, your cellular phone is connected to the base unit. If you move the cellular phone out of base unit range, the cellular phone is disconnected from the base unit. This feature allows the base unit to try to reconnect the cellular phone at regular intervals when it returns within base unit range. You can set the interval. The default setting is “1 min”.
Important:
RWhen you are using a cellular line or a Bluetooth headset, the base unit loses its
15
TG7841BX_UE(en)_0528_ver011.pdf 15
2013/05/28 18:56:47
