Using Bluetooth Devices
Copying phonebook from a cellular phone (phonebook transfer)
You can copy phonebook entries from the paired cellular phones or other cellular phones (not paired) to the unit’s shared phonebook. A cellular phone must be compatible with Bluetooth wireless technology.
Important:
RIf a copied entry has 2 or more phone numbers, each phone number (6 max.) is stored as a separate entry with the same name.
RIf a phonebook entry includes additional data such as a picture, that entry may fail to copy to the base unit.
RIf your cellular phone includes international call entries, set the conversion codes before copying (page 45).
1Handset:
MMENUN#618
2Handset:
To copy from paired cellular phones: MbN: Select the desired cellular phone. a
MSELECTN
R Copied items are stored to the group (“Cell 1” or “Cell 2”) which the cellular phone is paired to.
To copy from other cellular phones (not paired):
MbN: “Other cell” a MSELECTN a
MbN: Select the group you want to copy to. a MSELECTN
3When “Use the cell to
transfer phone book” is displayed: Go to step 4.
When “Select mode” menu is displayed:
MbN: Select “Auto” or “Manual”. a
MSELECTN
“Auto”: Download all entries from the cellular phone automatically. Go to step 5. “Manual”: Copy entries you selected.
R “Select mode” menu is displayed only when the cellular phone supports
PBAP (Phone Book Access Profile) for Bluetooth connection.
RSome cellular phones may require you to perform an operation on the cellular phone even if you select “Auto”.
4Cellular phone:
Follow the instructions of your cellular phone to copy phonebook entries.
R For other cellular phones (not paired), you need to search for and select the base unit. The base unit PIN (default: “0000”) may be required.
R The entries being copied are displayed on the handset.
5Handset:
Wait until “Completed” is displayed.
R You can continue copying other entries if necessary.
6Handset: MOFFN
Note:
RSome copied entries may have characters which do not exist in the character table (page 27). These characters can be displayed but cannot be entered when editing an entry.
RThe unit does not support some characters. If a copied entry includes those characters, they are replaced with other available characters or “H”.
RIf you receive a call while copying phonebook entries, the copying procedure stops. Try again after finishing the call.
Setting conversion codes
You must first set the following 3 dialing codes in the base unit which you want to copy to before transferring the phonebook from your cellular phone (each 4 digits max.).
–“International”: An international prefix used when you make an international call.
–“Country code”: Your country code for international calls.
–“National access”: A trunk prefix; the initial digit(s) to be dialed in a domestic call, prior to the area code.
Base unit
1MMENUN
45
TG7841BX_UE(en)_0528_ver011.pdf 45
2013/05/28 18:56:49
