9
Setting the Alarm
If your pager is equipped with the ALARM feature,
and
you wish to set the alarm:
• Press Á to display the function menu.
• Press the ä to move the cursor to the SET ALARM
Ö icon.
• Press Á to display the set alarm screen.
When the screen first appears, the cursor is at the left-
most position. This icon defines the alarm status:
either alarm enable À, or alarm disable Ã.
• Press the left directional button to increment or toggle
between alarm enable À and alarm disable Ã.
• Press ã to move the cursor to the hour field.
• Repeat the process for each field (hour, minute).
• Press Á to make the change.
The alarm indicator À appears if an alarm has been
set. At the selected time, your pager either vibrates or
emits a unique 8-second alert, depending on the alert
mode.
NOTE: To escape from any field without making any
changes, press Ë.
Setting the Auto On/Off function:
If your pager is equipped with the AUTO ON/OFF fea-
ture,
and
you wish to activate this feature:
10
• Press Á to display the function menu.
• Press ä to move the cursor to the AUTO ON/OFF
icon å.
• Press Á to display the AUTO ON/OFF screen.
When the screen first appears, the cursor appears at the
left-most position. This icon defines the AUTO ON/OFF sta-
tus: either AUTO ON/OFF Enabled å, or Disabled õ.
• Press ä to increment or toggle between AUTO ON/
OFF Enable å or Disable õ.
• Press ã to move the cursor to the hour field. The
auto ON time is shown on the left and the auto OFF
time is shown on the right.
• Repeat the process for each field for both the ON
time and the OFF time (hour, minute, and AM/PM if your
pager is set to display time in the 12 hour mode).
• Press Á to activate the AUTO ON/OFF function.
The indicator Î displays in the upper left-hand cor-
ner of the display if the AUTO ON/OFF function has been
enabled. If the ON time is equal to the OFF time, the
AUTO ON/OFF function is not enabled.
NOTE: To escape from any field without making any
changes, press Ë.
11
Deleting Messages from Memory:
You can clear or delete an unlocked message from
memory while you are viewing it, or through the func-
tion menu.
• Select the message you wish to delete from mem-
ory by pressing ä or ã directional buttons to the
desired memory position.
• Press Á to display the function menu.
• Press ã to move the cursor to the DELETE MSG
icon ï.
• Press Á to receive confirmation of delete request.
• Press Á to delete the message.
If your pager is equipped with the DELETE ALL fea-
ture,
and
you wish to delete all unlocked messages
from memory, move the cursor within the function
menu screen to the DELETE ALL icon ñ and press Á
twice.
Other Features:
Low Battery Alert: A low battery icon Ì appears in
place of the date at the onset of low battery conditions.
An audible low battery alert is also heard at that time.
Duplicate Message: If the same message is received
more than once, DUPLICATE appears at the begin-
ning of your new message to indicate that your mes-
12
sage has already been received. Y our ne w message
will contain the latest time stamp.
Out of Range: With this option installed, whenever you
are too far away from your paging system's transmitter to
reliably receive messages, your pager displays an OUT
OF RANGE message and an out-of-range icon ö.
Cleaning Your Advisor Pro P a ger:
To clean smudges and grime from the exterior of the
Advisor Pro
housing, use a soft, nonabrasive cloth
moistened in a mild soap and water solution. Rinse the
surface using a second cloth moistened in clean water.
Do not use alcohol or other cleaning solutions.
Repair and Maintenance:
Your
Advisor Pro
pager, properly handled, is capable of
many years of trouble-free service. However, should it
ever require service, Motorola’s National Service Organi-
zation, staffed with specially trained technicians, offers
conveniently located repair and maintenance facilities
worldwide.