Useful Information
Liquid damage
Problem
Liquid or other form of moisture has entered the handset/base unit.
Caution:
Cause/solution
RDisconnect the AC adaptor and telephone line cord from the base unit. Remove the batteries from the handset and leave to dry for at least 3 days. After the handset/base unit are completely dry, reconnect the AC adaptor and telephone line cord. Insert the batteries and charge fully before use. If the unit does not work properly, contact an authorized service center.
RTo avoid permanent damage, do not use a microwave oven to speed up the drying process.
Registering a handset to the base unit
1Handset:
MMENUN#130
2Base unit:
Press and hold MLOCATORN for about 5 seconds until the registration tone sounds. R The next step must be completed within 90 seconds.
3Handset:
Press MOKN, then wait until a long beep sounds.
Deregistering a handset
1MMENUN#131
2 MSELECTN
3 MbN: “Yes” a MSELECTN 4 MOFFN
66
TG7841BX_UE(en)_0528_ver011.pdf 66
2013/05/28 18:56:50
