Storing unwanted callers, Mcidn | Panasonic KX-TG7841UE guide

Call block (Caller ID subscribers only)

This feature allows the unit to reject calls when:

– the unit receives a call from a phone number stored in the call block list as unwanted (“Storing unwanted callers”, page 39).

– the unit receives a call without phone number (“Blocking incoming calls without phone number”, page 40).

TG7841BX_UE(en)_0528_ver011.pdf 39

MOFFN

displayed.

Changing the start and end time Handset / Base unit

1 MMENUN#237

2 Continue from step 3 for handset or step

3 for base unit, “Turning night mode on/ off”, page 38.

Changing the handset name

The handset can be given a customized name (“Bob”, “Kitchen”, etc.). This is useful when you make intercom calls. You can also select whether or not the handset name is displayed in standby mode. The default setting is “No”. If you select “Yes” without entering any handset name, “Handset 1” is displayed.

Handset

1 MMENUN#104

2 Enter the desired name (max. 10 characters; see the character table, page 27).

R If not required, go to step 3.

3 MSAVEN

4 MbN: Select the desired setting. a MSELECTN 2 times

R When the night mode is set,

MSAVEN a MEXITN

4 Enter the desired hour and minute you wish to end this feature.

Programming

When a call is received, the unit rings for a short time*1 while the caller is being identified. If the phone number matches an entry in the call block list, the unit emits no sound to the caller, and disconnects the call.

*1 This is called first ring. If you do not want the first ring to sound, turn this setting to “Off” (page 40).

Important:

RWhen the unit receives a call from a number that is stored in the call block list or a call without a recognized phone number, the call is logged in the caller list

(page 42) with after the call is disconnected.

RYou can program this setting using either the base unit or the handset.