![](/images/new-backgrounds/1211003/21100397x1.webp)
Answering System for Landline
Recording your greeting message
Handset
1MMENUN#302
2MbN: “Yes” a MSELECTN
3After a beep sounds, hold the handset about 20 cm away and speak clearly into the microphone (2 minutes max.).
4Press MSTOPN to stop recording.
5 MOFFN
Using a
Listening to messages using the base unit
When new messages have been recorded:
–M N on the base unit flashes.
–“New message” is displayed.
Press M N (PLAY).
RIf new messages have been recorded, the base unit plays back new messages.
RIf there are no new messages, the base unit plays back all messages.
Operating the answering system during playback
The unit provides 2
–If you erase or do not record your own greeting message, the unit plays a
–If the message recording time (page 54) is set to “Greeting only”, callers’ messages are not recorded and the unit plays a different
Resetting to a pre-recorded greeting message
Key
MDN or MCN
MN
MN
MPAUSEN
MnN (STOP)
MERASEN
Operation
Adjust the speaker volume
Repeat message*1
Skip message
Pause message
To resume playback, press M N.
Stop playback
Erase currently playing message
If you want to use a
Handset
1MMENUN#304
2 MYESN a MOFFN
Playing back the greeting message
Handset
1MMENUN#303
2 To exit, press MOFFN.
*1 If pressed within the first 5 seconds of a
message, the previous message is played.
Calling back (Caller ID subscribers only)
If caller information was received for the call, you can call the caller back while listening to a message.
Press MZN during playback.
RTo edit the number before calling back, press MEDITN. Add or erase digits to the beginning of the number as necessary.
RTo call back using a cellular line, continue from step 2, “Making cellular calls”, page 24.
49
TG7841BX_UE(en)_0528_ver011.pdf 49
2013/05/28 18:56:49