Configuration
Configuring the X.25 Link
DCE_80 | DCE_84 | DCE_88 | DTE_80 |
DTE_84 | DTE_88 | AUSPAC | DATANET1 |
DATAPAC | DATEXP_AUSTRIA | DATEXP_DEUTSCHE | DCS |
DDN | DDXP | HPPPN | ITAPAC |
LUXPAC | PSS | TELENET | TRANSPAC |
TYMNET | IBERPAC | TELEPAC | DATAPAK |
Step 3. Click on OK to return to the “Configure X.25 Card” window when you have finished configuring the X.25 Address.
Configuring X.25 Virtual Circuits (VCs)
Follow the steps below to configure X.25 virtual circuits:
Step 1. From the “Configure X.25 Card” window, select Configure Virtual Circuits. The following dialog appears:
Figure
Step 2. Enter or modify field values as required (refer to the field descriptions below).
When you configure the Quantity column (starting with the number of Permanent VCs), SAM automatically fills in the starting Logical Circuit Identification (LCI) as you Tab between fields.
36 | Chapter 3 |
