NOTE
Step 8.
Step 9.
Step 10.
Step 11.
Step 12.
NOTE
Step 13.
OLA/R Overview and Concepts
How to
The cables must be removed from the PCI I/O card before proceeding with the OLR operation.
Once you click the “OK” button on the Analyze Critical Resources screen, SAM begins to take the selected card out of service. SAM requests a suspend operation for the driver of the selected card.
Once the drivers are suspended, SAM turns off the power to the slot in which the card is located.
SAM then illuminates the amber attention LED on the slot itself to make the suspended card more easily locatable on the system chassis.
SAM now requests that the card be replaced via a dialog box. Read the contents of this dialog for any extra information (Expansion cabinets, warnings, etc.). Also at this point, SAM turns off the slot’s green power LED.
Replace the target card. Please refer to your system manual for removal and insertion of the PCI I/O cards.
Do not connect the cables to the card at this point.
At this point, the amber LED should still be be activated, and the green power LED should still be off.
Return to the console, and click the “OK” button on the Replace Card dialog.
WARNING | Pressing the “Cancel” button here will prevent you from easily |
| restoring power to this slot (or Power Domain). If this happens, |
| you must |
|
|
Step 14. Once you click “OK”, SAM first resets the attention LED to it’s normal state.
Chapter 4 | 109 |
