HP General IO Connectivity manual Configuring Two Lans, with One Box Per Lan

Configuration

Configuring X.25 over LLC2

lan21

To start and stop above configuration:

Starting:

Execute the following commands at the command prompt:

x25init -c x25_box_1_host -L llc2_lan_2

Stopping:

To stop the configuration execute the following commands:

x25stop -d lan2 -L 0 # stop XOL interface with logical port id 0 on lan2

Configuring Two Lans, with One Box Per Lan

A graphical representation of the above configuration with some arbitrary values for the MAC addresses and lan-ids is as shown:

Figure 3-12 Two Lans, One Box per Lan configuration

To Configure Host to LAN0 to Box0

Chapter 3 69