HP General IO Connectivity manual Restart Packet Codes, RESET/CLEAR Packet Codes

Diagnostic Messages

Packet Codes

Packet Codes

RESTART Packet Codes

When the system receives a RESTART INDICATION packet, the received CLEAR INDICATION or RESET INDICATION packet contains a cause code of 0 and the diagnostic code used in the RESTART.

RESET/CLEAR Packet Codes

The system may generate a RESET/CLEAR because of an error, lack of memory, or other condition. When this occurs, a RESET/CLEAR INDICATION is delivered to the application and a RESET/CLEAR REQUEST packet is sent to the network. The cause code is always zero as dictated by ISO in the IS-8208 standard, and the diagnostic is one of the codes in this appendix. Both the REQUEST and the INDICATION carry the same cause/diagnostic combination.

Appendix C 249