Configuration
Configuring Remote System Access
Table | Provide X.25 Information Field Descriptions | |
|
|
|
| X25 Address | X.25 address (sometimes referred to as the X.121 |
|
| address) of the remote system. The X.25 address |
|
| assigned by the network provider uniquely |
|
| identifies the node in an X.25 network. The |
|
| address consists of a maximum of 15 digits. You |
|
| must complete this field. |
|
|
|
| Switched VC | Enable this field if a switched virtual circuit |
|
| (SVC) will be used for this connection. When |
|
| Switched VC is enabled (default), three additional |
|
| fields can be configured: Request reverse |
|
| charging, Accept reverse charging, and Closed |
|
| user group (refer to the field descriptions below). |
|
|
|
| Permanent VC | Enable this field if a permanent virtual circuit |
|
| (PVC) will be used for this connection. When |
|
| Permanent VC is enabled, two additional fields |
|
| can be configured: PVC Number and Local |
|
| Programmatic Access Name. |
|
|
|
| Request reverse | Enable this field if the local system will make |
| charging | collect calls to the remote system. If this field is |
|
| disabled, no collect calls can be made. |
|
|
|
| Accept reverse | Enable this field if you want the local system to |
| charging | accept collect calls from the remote system. If this |
|
| field is disabled, no collect calls will be accepted. |
|
|
|
| Closed user group | Enable this field if you subscribed to a closed user |
|
| group (CUG) and you want to use the CUG with |
|
| this connection. Do not select this item if you did |
|
| not subscribe to a CUG or if you do not want this |
|
| connection to belong to a CUG. If you enable this |
|
| field, an additional field (CUG Number) appears. |
|
| Enter the number of the CUG to be associated |
|
| with this connection. |
|
|
|
Chapter 3 | 55 |
