Configuration
Configuring the X.25 Link
Configuring an X.25 Address
Follow the steps below to configure an X.25 address:
Step 1. From the “Configure X.25 Software” window, select Configure X.25 Address. The following dialog appears:
Figure
NOTE |
| The SAM windows and dialogs shown on these pages are intended only |
|
| as examples. The information that appears in your SAM dialogs, such as |
|
| the Card Name and Programmatic Access Name, depends on your |
|
| particular communications hardware. |
|
|
|
Step | 2. Enter or modify the field values as required (refer to the field | |
|
| descriptions below). |
34 | Chapter 3 |
