Configuration
Configuring the X.25 Link
Step 5. Click on Modify Throughput Class Settings to modify Switched and Permanent VC throughput class settings. The following dialog appears:
Figure
Step | 6. Enter or modify field values as required (refer to the field descriptions |
| below). |
Table | Modify Throughput Class Settings Field Descriptions |
Switched VC
Default: Inbound
and Outbound
CCITT class number. If Throughput Class negotiation is disabled, this value replaces the Switched VC Negotiated field value. The range is 3 through 13 and the default is 11. See the table after these field descriptions listing the CCITT class numbers and the corresponding line speed Baud rate. Use the value given on your subscription form.
Chapter 3 | 45 |
