Table C-2 Packet Type Invalid | HP General IO Connectivity instruction

			Diagnostic Messages
			X.25 Diagnostic Messages
Table C-2	Packet Type Invalid (Continued)

	24 (CLEAR)	Packet type	Invalid packet received on VC in
		invalid for state	state P5 (Call Collision).
		P5.

	25 (CLEAR)	Packet type	Invalid packet received on VC in
		invalid for state	state P6 (DTE Clear Request).
		P6.

	27 (RESET)	Packet type	Invalid packet received on VC in
		invalid for state	state D1 (Flow Control Ready).
		D1.

	29 (RESET)	Packet type	Invalid packet received on VC in
		invalid for state	state D3 (DCE Reset Indication).
		D3

Table C-3	Packet Not Allowed

	Diagnostic	ISO	Explanation
	Diagnostic	Description	Explanation
		Description

	33	Unidentifiabl	Packet that cannot be identified (3rd
	(RESTART,	e packet.	byte of the level 2 information field not
	CLEAR,		defined in CCITT X.25
	RESET)		Recommendation received).
			REJECT or REGISTRATION packet
			received.

	34 (CLEAR)	Call on one	If configured as DTE, CALL
		way logical	INDICATION received with logical
		channel.	channel identifier (LCI) corresponding
			to one-way logical channel outgoing.
			If configured as DCE (DXE), CALL
			INDICATION received with logical
			channel identifier (LCI) corresponding
			to one way logical channel incoming.

Appendix C

251

Image 251

HP General IO Connectivity manual Table C-2 Packet Type Invalid, Table C-3 Packet Not Allowed Diagnostic

Contents

Manufacturing Part Number J2793-90073 E0607 Edition Legal Notices Contents Diagnostic Utilities PAD Services Tracing and Logging Utilities SUsing Non-English Subscription Forms Diagnostic Messages Tables Tables Tables Tables Figures Figures About the X.25 Product Introduction BSD IPC TCP/UDP Link Architecture Application L7, Presentation L6, Session L5 Levels Transport Level L4 Packet/network Level L3 Data link L2 and Physical L1 Levels Data link L2 and Physical L1 Levels Chapter Installation Hardware Compatibility Before you Install the softwareInstalling Multiple X.25 Interface Cards Hardware Requirements Related Parameters OS Platform and Version CompatibilityMemory Example TM = 9,123,840 8.7 Mb Software Requirements Step Installing the X.25 Link Software Installing the X.25 Link Software Chapter Configuration Using SAM Configuring the X.25 Link Using SAM’s On-line Help Configuring an X.25 Address Field Descriptions Configuring X.25 Virtual Circuits VCs Configuring an Internet Address Configure Internet Address IP Address and Default Subnet Masks Class Configure Internet Address Field Descriptions Modify IP Over X.25 Defaults IP Address and Default Subnet MasksIP Address Class Default Subnet Mask Verifying Level 3 Values Modify IP over X.25 Defaults Field Descriptions Verify Level 3 Values Field Descriptions Verify Level 3 Values Default is Modulo-8 Permanent VC Flow Control Field Descriptions Switched VC Flow Control Field Descriptions Configuring the X.25 Link Throughput Classes and Line Speeds Verifying Level 2 Values Settings for your configuration Verify Level 2 Values Field Descriptions Using Maximum Window-Size Settings with Modulo-128 Level 3 Packet Level 2 Window Size Recommended Maximum Window Sizes Configuring Remote System Access Add Internet Connectivity Dialog Add Internet Connectivity Field Descriptions X25init -cconfigurationfile-a ipmapfile Provide X.25 Information Field Descriptions Internet Addresses & Routes object list. SAM updates Configuration Files Configuring X.25 over LLC2 Field Format Value Patch requirements for the XOL HA feature and configurableAdditional XOL specific configuration parameters Xoldsap Devicelan00x7c Lanboxid Lanboxaddr 0x080009c4728a 0x7e Example 3-3 LLC2 Configuration Ccitt Run the following command at the Cisco console Step Run the following command at the Cisco console Starting and Stopping Configuration One Lan and Two Boxes configuration Sample setup and Configuration 11 One LAN, Two Boxes Configuration To connect Host to BOX To connect Host to BOX To Connect Box 1 to Host Configuring Two Lans, with One Box Per Lan To Start and Stop above configuration To configure Host to LAN 1 to BOX To Connect Box 0 to Host To Connect Box 1 to Host Troubleshooting LLC2 Configuration Remote Configuring PAD ServicesAdd/Modify PAD Terminal Emulation Local to Add/Modify PAD Support Server Remote to Local Add/Modify Uucp Server Add/Modify PAD Printers Server Add/Modify X.3 Parameters PAD. As the terminal characteristics of your session change, Configuring the High Availability Feature Cluster Definition Commands to be Configured in High Availability Packages Example 3-4 One Example of Remote Failure High Availability Configuration $ x25check Checking the Configuration X25check 250207 -i interface0p2 Unique MAC Address Requirement Configuring the High Availability Feature for X.25 over LLC2 Local Failover Configuring XOL HA for Local Failover Without ServiceGuard 13 Before the Failover After the Failover Example Configuring Standby Device and Unique MAC Address Remote Failover Configuring XOL HA for Remote Failover Using Service Guard 15 Before the Failover XOL Cluster Definition Commands Used in the SG Package Control Scripts XOL Package Definition Example 3-6 XOL SG package for remote failover Service Guard Remote Failover with Local Failover Support Using Then, the above parameters take the following values Example Remote Failover with Local Failover support # Service Names and Commands Configuring the High Availability Feature for X.25 over LLC2 Ping Verifying the X.25 Link 100 OLA/R Overview and Concepts 102 Terms used in this section Meaning Important Terms and Concepts On-Line Addition On-Line ReplacementPlanning and Preparation Card Compatibility Critical Resources Failover Actions / Single Points of Failure Disconnect messages. The connections will have to be How to On-line Replace OLR a J3525A orJ3526A PCI Card using SAM Interface card under consideration will be stopped before Screen Buttons Outcome Activate User Actions Displays Three Possible Critical Resource Analysis CRA Outcomes Chapter 109 110 PCI Card using SAM How to On-line Add OLA a J3525A or J3526A 112 Chapter 113 114 Diagnostic Utilities Available Diagnostic Utilities Utility Description Refer to Using Diagnostic Utilities Psidad Scope of X.25 Diagnostic Utilities Before Using the Diagnostic Utilities Example 1 Running x25check Interactively No Parameters X25check and x25server 120 Example 3 Running x25check With a Data Packet Example 2 Running x25check With an X.121 Address X25stat Example 1 Displaying the Current Configuration X25stat -d X25stat -g -d Example 2 Displaying Global Statistics Level 3 State Output on Screen Description/Meaning Diagnostic Utilities x25stat Level 2 Link State Output on Screen Description/Meaning Level 3 State Level 1 Link State Output on Screen Description/Meaning VC State Output on Screen Description/Meaning Example 3 Displaying Virtual Circuit Data PacketCounters VC State Example 4 Displaying Global X.25 Level 3 StatisticsExample 5 Displaying X.25 Level 1 and 2 Statistics Chapter 129 Example 6 Displaying Virtual Circuit Status X25stat -a Example 7 Displaying Current IP to X.25 Address Mapping Example Statistics for x25mibstat X25mibstat Option Remark X25mibstat PAD Services Ccitt Recommendations PAD Support Protocols PAD services and the HP 9000 host Overview PAD Services as a PipeRemote PAD Support x29server Call Acceptance Mechanism and System Security Remote PAD Support 0x01000000 Supported Remote PAD Terminals Configuring Remote PAD SupportConfiguring padspt Parameters Padspt Parameters Chapter 141 Launching Applications Automatically Remote PAD Printer Support x29printd Remote PAD Printer Support x29printd Remote Printer Support System Requirements Configuring Remote PAD Printers 146 Configuring the Unix Line-printer Spooler for x29printd X29printd and lpsched Operation Printer ConfigurationExamples Verifying the Configuration Uucp Support x29uucpd Receiving HP Configuring Uucp PAD Support Paduucp Parameters File ContentsConfiguring the x29hosts file Chapter 153 At the dave system Configuring System and Device Files for Uucp Chapter 155 At the bill system Chapter 157 158 Chapter 159 Local PAD Emulation padem Command Mode Parameter Descriptions Data Transfer ModeConfiguring Local PAD Emulation 162 Chapter 163 PAD Command Set PAD Commands Extended Command Set 166 Configuration Set Syntax Configuring X.3 Profile Parameters Parameter Values Modifying Parameters Parameter Descriptions Default X.3 Parameters Value Meaning Parameter Description Chapter 171 172 Value Baud Rate 174 Chapter 175 176 Chapter 177 178 Tracing and Logging Utilities 180 Scope of X.25 Tracing and Logging Utilities Parameters NettlSyntax 0x20000000 Tracing Masks Keyword a0x80000000 0x40000000 184 Chapter 185 Netfmt 186 Filter File Syntax Creating a Filter File Filter Filter File Options System/subsystem Type Value Level Chapter 189 Filter File Examples Chapter 191 Strace 7030 Chapter 193 7030 + 1 = Output Format Frame Type Parameters Displayed Packet Type Parameters Displayed Examples of the strace Command Record Time Tics Pri Ind Mod Sub Data Num Examples of strace Output 198 Strerr 200 Troubleshooting Troubleshooting Commands Purpose Refer to Troubleshooting Your X.25 Link Troubleshooting Commands Troubleshooting Flowcharts and Procedures Flowchart Flowchart 2 Procedures and Notes Chapter 205 See Note Flowchart 2 Initialization Check Flowchart 3 Hardware and License Check Flowchart 3 Procedures and Notes Flowchart 4 Procedures and Notes Flowchart 4 X.25 Configuration Check Flowchart 5 Procedures and Notes 210 Flowchart 5 IP Over X.25 Check For Systems With No Backup Power Supply Recovering From a Power FailureFor Systems With a Backup Power Supply Reporting Problems 214 Host Back-to-back Configuration on the Same Host 216 Command Summary Configuration and Troubleshooting Commands 218 IP-to-X.121 Address Mapping Table Examples of x25init Syntax for PVCs Syntax for SVCs File Mapping Parameters 222 Chapter 223 224 Using Non-English Subscription Transpac Subscription Form Translations Itapac Table A-1 French Transpac Subscription Form Throughput Class Setting Table A-2 Using Your Itapac Italian Subscription Form Table A-4 Using your Iberpac Spanish Subscription Form 230 Configuration Files Table B-2 Etc directory Configuration FilesTable B-1 Etc/x25 directory Table B-5 Table B-3 Var/x25/log/x25server directoryTable B-4 Table B-6 Example FilesX25initdef File Appendix B 235 236 Table B-7 X25initsmpl File 238 X3config File 240 Example Files Appendix B 241 Table B-8 X29hosts File Network Type File x25networks Table B-9 Diagnostic Messages Appendix C Diagnostic Message Example Cause Code Settings Restart Packet Codes RESET/CLEAR Packet CodesPacket Codes Explanation Diagnostic MessagesTable C-1 No Additional Information Diagnostic Table C-2 Packet Type Invalid Diagnostic Table C-2 Packet Type Invalid Table C-3 Packet Not Allowed Diagnostic LCI Table C-3 Packet Not Allowed Incoming Table C-4 Timer Expired Diagnostic Table C-4 Timer Expired Appendix C 255 256 Appendix C 257 Table C-7 International Problem and Maintenance Diagnostic Table C-6 Category Miscellaneous Diagnostic Table C-8 DTE-Specific Signals Diagnostic Table C-7 International Problem and Maintenance Table C-9 OSI Network Service Problem Diagnostic Table C-8 DTE-Specific Signals Nsap Table C-9 OSI Network Service Problem Table C-10 Higher Level Initiated Diagnostic Table C-10 Higher Level Initiated 264 Index Symbols 266 267 268 269