158

PAD Services

UUCP Support (x29uucpd)

bill --- --- --- [error message]

Refer to the UUCP section in Chapter 9 of the Remote Access: User’s Guide (part number B2355-90037) for more information on UUCP error messages.

Step 14. Test the file permissions of both bill and dave using:

where -r1indicates that dave is the “master” (for UUCP purposes) and -x9is the highest debugging level.

If successful, you should receive output similar to:

mchFind called (bill) list (rmail) num = 1 list (/) num = 1 list (/) num = 1 list (ALL) num = 1

_Request (TRUE), _Switch (TRUE), _CallBack (FALSE), _MyName (dave),

_Commands ALL chdir(/var/spool/uucp/bill) conn(bill)

ProtoStr = f

Device Type dev_bill wanted mlock x29/bill succeeded fixline(5, 19200)

fixline - direct gdial(direct) called

/* X.25 connection established*/

getto ret 6 expect: (““) got it sendthem (ˆMDELAY

ˆMDELAY

ˆMˆM)

expect: (ogin:)

/* reception of “bill”’s banner*/

ˆMGeneric-Sys (generic) [HP Release A.B9.04]ˆJˆMˆJˆMlogin:got it sendthem (uucpˆM)

enter ub_sst, status is : 0

Rmtname: bill

imsg > ˆMˆMˆJlogin: ˆMˆMˆJlogin: ˆMˆMˆMˆJlogin: ˆMˆJlogin: uucpˆMˆMˆJPlease wait

..checking for disk quotasˆMˆJˆPShere=billˆ@Login Successful: System=bill

Chapter 6

HP General IO Connectivity manual 158