HP General IO Connectivity manual 256

Diagnostic Messages

X.25 Diagnostic Messages

Table C-5	Call Setup, Call Clearing, or Registration Problem (Continued)
	66 (CLEAR)	Facility	Parameter field of a packet size
		parameter	negotiation, window size negotiation or
		not allowed.	throughput class negotiation facility in
			a call setup packet has been found to
			be invalid because it contains values
			not allowed by the configured level
			(1980 or 1984).
			Parameter field of a packet size
			negotiation, window size negotiation,
			or throughput class negotiation facility
			in a CALL ACCEPTED or CALL
			CONFIRM packet has been found to be
			invalid because it contains values
			outside of the allowed range specified
			by the configuration and previous call
			setup packet.
			For DDN configured interfaces, the
			parameter field of the DDN standard
			or DDN precedence facility in a call
			setup packet has been found to be
			invalid because it contains values not
			allowed by the DDN X.25 Host
			Interface Specification (BBN83).
	67 (CLEAR)	Invalid	Unknown called address.
		called	Called address contains a non-BCD
		address.
			digit (i.e., a half byte with a value
			other than 0 through 9).
	68 (CLEAR)	Invalid	Calling address contains a non-BCD
		calling	digit (i.e., a half byte with a value
		address.	other than 0 through 9).
			Last digit of address field is not 0 and
			the total number of digits present in
			address field is odd.

256 Appendix C