Replacing the Fuse
The Fuse (314) is located in the Fuse
Holder (179) on the Control Panel (122).
The Fuse Holder is spring fitted.
Fuse Holder (179)
To remove Fuse Holder (179) Control Panel
Press down, then turn counterclockwise. (122)
Fuse (314)
Figure 34 | Fuse Holder (179) | |
Fuse Holder Socket | ||
|
1.To Remove the Fuse Holder:
a.Insert a flathead screwdriver (sold separately) into the slot in the Fuse Holder.
b.Press down and turn counterclockwise 1/4 turn.
c.Release pressure. Pull the Fuse Holder and Fuse out of the socket.
d.Replace with a new 250V 3 amp mini glass fuse.
2.To Replace the Fuse Holder, slide it into the Fuse Holder Socket and press in with the screw driver, turning clockwise until the Fuse Holder clicks into place. Release pressure. The Fuse Holder will be flush with the rim of the Fuse Holder
Socket.
|
| REV 10b |
Page 28 | For technical questions, please call | SKU 93212 |
