HP General IO Connectivity ISO, Table C-8, Table C-9, Diagnostic, Explanation, Description, OSI Network Service Problem, DTE-SpecificSignals (Continued)

Diagnostic Messages

X.25 Diagnostic Messages

Table C-8	DTE-Specific Signals (Continued)
	162	DTE not	Either level 3 or level 2 detected as
	(CLEAR,	operational.	down. Request delivered when
	RESET)		network interface was not operational.
			Condition usually results in an error
			returned to the application instead of
			CLEAR. Diagnostic is used when
			RESTART INDICATION has been
			received by interface. Interface is
			going down. RESTART REQUEST
			was sent on network.
	163	DTE	Lack of memory to establish, reset, or
	(CLEAR,	resource	clear a call, to process data, expedite
	RESET)	constraint.	data or acknowledgments, or to
			perform internal operation. This may
			indicate lack of network memory, or
			resource constraints on card. When
			resource constraint appears on
			connected circuit, CLEAR will be sent
			only if no recovery is possible.
	164	Fast select	CALL INDICATION requiring fast
	(CLEAR)	not	select facility has been received and
		subscribed.	fast select is not configured. Results in
			error when detected on CALL
			REQUEST.
	225	Disconnectio	X.25 subsystem is down when
	(CLEAR)	n (transient	X.25/9000 to IP subsystem is servicing
		condition).	CALL CONFIRMATION or incoming
			DATA.
Table C-9	OSI Network Service Problem
	Diagnostic	ISO	Explanation
		Description

260 Appendix C