Taylor 1528 instruction manual Repeat to set minutes, Toset two alarms

Press and hold SET/AL

Hour digits flash

Press +C/F or -PMCE/RCC to

change hours.

Press SET/AL to enter hours.

Minutes digits flash.

Repeat to set minutes.

Alarm 1 is active

Alarm 2 is active

2. Press and hold the “SET/AL” button.The unit will beep and the alarm’s hour digits will flash.

3. Press “+C/F” or “-PMCE/RCC” to change the hours. Press “SET/AL” to enter. The minutes will flash.

4. Press9 “+C/F” or “-PMCE/RCC” to change the minutes. Press “SET/AL” to enter.The unit will return to the clock dis- play.

5. A icon above the time indicates Alarm 1 is active.The unit will return to the clock display after approximately 15 sec- onds, or press “MODE” until the clock dis- play returns.

Toset two alarms:

Press the“MODE” button untilA2 appears. Repeat programming steps for A1.

A icon above the time indicates Alarm 2 is active.