Taylor 1528 instruction manual Please note: If the

Your WeatherGuide™ has a radio-controlled clock/calendar that sets itself to the radio signal transmitted by the U.S.Atomic Clock located in Colorado.To synchronize the atomic clock:

1.Press and hold the “-PMCE/RCC” button on the back of the base unit.The

Press and hold -PMCE/RCC to		unit will beep.The antenna icon				will
		flash on the screen.
synchronize atomic clock. Release		Please	note:	reception	may	take
when unit beeps.
		2-10 minutes.
Steady Icon = Atomic clock		2. When	the	icon is	steady,	the
synchronized		Atomic	Clock	has been	successfully
(may take up to 24 hours to		synchronized.
capture signal).
		3. Choose your time zone by pressing the
Press PMCE/RCC to choose		“PMCE/RCC” button.
time zone.
Please note: If the	icon disappears, the Atomic time signal is not
		6

available at the moment.Try another location later away from possible sources of interference, such as mobile phones, appliances, computers, refrigerators,TVs, etc. Daytime conditions such as sunlight and other atmospheric interferences can affect synchronization; try setting the clock during evening hours. Please note:if the signal is weak,it may take up to 24 hours for the atomic clock to establish a connection. In the meantime, the clock may be manually set. Once the atomic signal is found, it will override the manually programmed time and date.

The Atomic Clock will have a daily synchronization at 2:05 am Pacific Time every day. Each reception cycle is 2.5 minutes minimum and 10 minutes maximum.