To configure Host to LAN 1 to BOX | HP General IO Connectivity

Configuration

Configuring X.25 over LLC2

To configure the Host to LAN 0, BOX 0 communication the following configuration files need to be created.

•Generic X.25 configuration file, x25_lan_0_box_0

•LLC2 configuration file, llc2_lan_0_lan_1

The x25_lan-0_box_0 file will contain all the level 3 and level2 parameters. It also contains the following entries:

device lan0

XOL_logical_port_id 1

XOL_destination_macaddr 0x080009411371

XOL_DSAP 0x70

XOL_SSAP 0x70

	The LLC2 configuration file, llc2_lan_0_lan_1 will have the following
	entires:
lan0	1
lan1	1
	To configure Host to LAN 1 to BOX 1
	To configure the Host to LAN 1 to BOX 1communication, the following
	configuration file need to be created.
	• X.25 generic configuration file, x25_lan_1_box_1
	• LLC2 configuration file, llc2_2_lan_0_lan_1
	The x25_lan_1_box_1 file is created in the /etc/x25 directory. It will
	contain all the level 2 and level 3 parameters. It will also contain the
	following entries:

device lan1

XOL_logical_port_id 1

XOL_destination_macaddr 0x080009C4728A

XOL_DSAP 0x7E

XOL_SSAP 0x7E

There is only one LLC2 specific configuration file per Host. The file is llc2_lan_0_lan_1.

To Start and Stop above configuration:

Chapter 3