HP General IO Connectivity manual Cluster Definition

Configuration

Configuring the High Availability Feature

X.25 Cluster Definition

To configure a High Availability cluster, use SAM to define all cluster systems by giving their:

NODE_NAME

NETWORK_INTERFACE

HEARTBEAT_IP

X.25 Commands to be Configured in High Availability Packages

Start X.25 link

x25init -c x25config -a ipmap -d x25dev (see x25init (1m))

Stop X.25 link

x25stop -d x25dev (see x25stop (1m))

Monitor X.25 link

x25ifstate -d x25dev -H (see x25ifstate (1m))

X.25 Package Definition

An X.25 package is needed for each HA X.25 node. This package allows HP MC/ServiceGuard to automatically:

•start the X.25 link (x25init command) when the X.25 package starts

•start a process (x25ifstate command) to monitor the state of the X.25 link

•stop the failed X.25 package before migrating to a backup node

To define each X.25 package, you need:

Package Name:

to identify the X.25 package. Use a name such as x25pkg1.

Service Name:

to monitor the X.25 link to be managed

Service Command:

80 Chapter 3