HP General IO Connectivity manual # Service Names and Commands

Configuration

Configuring the High Availability Feature for X.25 over LLC2

# SERVICE NAMES AND COMMANDS

SERVICE_NAME [0] =pkg1.Service_Name_01 (same SERVICE_NAME as in pkg conf) SERVICE_CMD [0] ="/usr/sbin/x25HAmonitor -c x25config_llc2 -L llc2_conf_def -m " SERVICE_RESTART [0] = " "

#Unique MAC address in the subnet (LAN segment) which is not in use. This will be the Active MAC address on the active node in the cluster.

Supplied_MAC = 0x0060B0A4EBE5

#START OF CUSTOMER DEFINED FUNCTIONS function customer_defined_run_cmds

{

#START of customer defined run commands.

/usr/sbin/x25stop -d /dev/x25_1l0	# primary lan PPA is 1 and
XOL_logical_port_id is 0
sleep 2
/usr/sbin/lanadmin -A $Supplied_MAC 1

/usr/sbin/x25init -c /etc/x25/x25config_llc2_1 -L /etc/x25/llc2_conf_def sleep 5

#Check and stop the x25HAmonitor if already running

#This is needed as Service Guard monitor starts the monitor later

PID=`/usr/bin/ls /var/x25/tmp/x25HAmonitor_1l0.* /usr/bin/awk -F '.' '{ print $2 }'`

PROC_NAME=`/usr/bin/ps -e /usr/bin/grep $PID /usr/bin/awk '{ print $4 }'` if [[ $PROC_NAME = "x25HAmonitor" ]]

then

/usr/bin/kill $PID

fi

test_return 51

#END of customer defined run commands

}

Chapter 3 97