Tracing and Logging Utilities strace
Table | (Continued) |
|
|
|
|
| FRMR Out | “Rsn 1” means the control field |
|
| received was not defined or not |
|
| implemented. “Rsn 3” means the |
|
| control field received was invalid. |
|
| “Rsn 4” means the information |
|
| field received was too long. “Rsn |
|
| 8” means the control field |
|
| received contained an invalid |
|
| variable. |
|
|
|
| REJ In/Out (level 2) | “N(XX)” is an internal variable of |
|
| no importance or meaning. |
|
|
|
| LINK Bsy (level 2) | “Local” means that the RNR has |
|
| been sent. “Remote” means that |
|
| the RNR has been received. |
|
|
|
Table | Output Format |
|
| |
|
|
|
|
|
| X.25 level 1 |
| a | Baud control (tx and rx counter) |
| (mod=210) |
| pri 0 |
|
|
| pri 0 | Baud control (threshold exceeded) | |
|
|
| ||
|
|
|
|
|
|
|
| pri 0 | Baud control (number of times threshold |
|
|
|
| exceeded) |
|
|
|
|
|
a. pri = Logging priority level
Examples of the strace Command
To display all event messages from X.25 level 3 for all interfaces, use:
strace 200 all all
To display all event messages from X.25 level 3 for interface 0, use:
strace 200 48 all
To display event messages from X.25 level 3 with priority levels 1 to 3, and from X.25 level 2 with priority levels 1 and 2, use:
strace 200 all 3 201 all 2
196 | Chapter 7 |
