NOTE

Configuration

Configuring X.25 over LLC2

Configuring X.25 over LLC2

This section describes how to configure X.25 over LLC2. Configuring X.25 over LLC2 allows X.25 layer 3 to connect to DLPI instead of LAP-B and provides the X.25 functionality on top of LAN cards such as Ethernet, FDDI, and TokenRing.

In this document, an XOL interface on the peer or local system is referred to as “box”.

Configuration Files

To configure the LLC2 feature, the following configuration files must be added or updated manually:

Generic X.25 configuration file

LLC2 specific configuration file Generic X.25 Configuration file

The generic X.25 configuration file is used with a few additional XOL specific parameters to configure X.25 over LLC2 (XOL). To support the XOL HA feature, some of the existing parameter names are modified and a few new parameters are introduced.

Chapter 3

57

Page 57
Image 57
HP General IO Connectivity manual Configuring X.25 over LLC2, Configuration Files