Line Keys, Programmable Keys, and Softkeys
41-001451-00 REV00 – 07.2011 76
Configuring an Automatic Call Distribution (ACD) Key
Use the following procedure to configure ACD on the 6735i IP Phone. The procedure shows the softkey screens as an
example.
Using the ACD Feature on your IP Phone
The ACD feature allows you to login to a phone queue in order to receive distributed calls on your IP phone. To login to a
phone queue, you must preconfigure an ACD softkey, programmable key,. or expansion module key on your IP Phone as
described in the previous procedure.
Aastra Web UI
1. Click on Operation->Softkeys and XML.
or
Click on Operation->Programmable Keys.
or
Click on Operation->Expansion Module <N>.
Softkeys
2. Select from "Key 1" through "Key 20".
3. In the "Type" field, select "Auto call distribution".
4. In the "Label" field, enter a label to apply to this ACD key.
5. In the "Line" field, select a line to apply Automatic call distribution. Valid values are 1 through 9.
6. In the state fields, check (enable) or uncheck (disable) the “idle” state for this softkey.
Programmable Keys
Note:
It is recommended you configure no more than a single ACD programmable key or Expansion Module key per IP
phone.
7. Select from "Key 1" through "Key 6".
8. In the "Line" field, select a line to apply Automatic call distribution. Valid values are 1 through 9.
Expansion Module Keys
9. Select from “Key 1” through “Key 36” (M670i).
or
Select from “Key 1” through “Key 60” (M675i).
10. (M675i) In the "Label" field, enter a label to apply to this ACD key.
11. In the "Line" field, select a line to apply Automatic call distribution. Valid values are 1 through 9.
12. Click Save Settings.