| PAD Services |
| UUCP Support (x29uucpd) |
name | Mandatory. This is the name of the programmatic |
| interface that will be used for call setup. There is no |
| default for this entry. If this entry does not exist, the |
| call setup will not be completed and file transfer will |
| not take place. This name must match with the |
| programmatic access name (also called name) specified |
| in x25init. |
remote_x121 | Mandatory. This is the X.121 address of the X.25 |
| interface card of a host system where the PAD support |
| program (for example, /usr/sbin/x29server) is |
| running. This address is required for calls to be |
| initiated. There is no default for this address. |
cud | Optional. This is the Call User Data (CUD) appended |
| to the protocol ID (0x01000000) for any call request |
| packets sent to this device. Strings of 12 characters or |
| less are permitted. |
cug | Optional. This is a the Call User Group (CUG) |
| number (a positive value between 0 and 99) embedded |
| in the call request packet sent to this device. |
logging | Optional (default = 1). Specifies the logging level for |
| each UUCP connection to this device. The log file is |
| /var/x25/log/x29uucpd/[device_name][child_pid |
| ]. Logging levels for this UUCP device are 0, 1, 2, or 3 |
| where: |
| 0 – No logging (no log file is created). |
| 1 – Error logging. |
| 2 – Error and warning logging. |
| 3 – Error, warning, information, and status logging for |
| troubleshooting. |
| HP recommends using log level 0 (no logging) for |
| normal operation. |
reverse_charge Optional (default is disable). Specifies the reverse charge option for call setup at this address. Possible settings are disabled (or disable) and enabled (or enable). When reverse charge is enabled, x29uucpd sends out call request packets with reverse charge requested.
Chapter 6 | 153 |
