SIMATIC Box PC 620 Expansions

Caution

! The electronic components of the printed circuit boards are extremely sensitive to electrostatic discharge. Certain precautionary measures are therefore necessary when handling such components. These measures are explained in the guidelines for handling electrostatically sensitive devices at the end of this manual.

Installing the SO DIMM Cards

To plug in expansion submodules, proceed as follows:

1.Open the unit as described in Section 4.1.

2.Plug the cards into the slots. Note the safety recess on the connector side of the SO DIMM card.

3.Push the card down applying light pressure until it locks into place.

4.Close the unit.

!

Caution

Risk of damage!

Make sure that the cards sit securely in the slots, otherwise they can fall out and be damaged.

Installation

The memory configuration is detected automatically. When you switch on the unit, the distribution of base and extended memory is displayed on the screen.

SIMATIC Box PC 620 Manual

4-9

A5E00131465-01

Page 69
Image 69
Siemens 620 appendix Installing the SO Dimm Cards, Risk of damage