Siemens 620 appendix Table of contents

Table of contents

4	SIMATIC Box PC 620 Expansions		4-1
	4.1	Opening the Unit	4-2
	4.1.1	Prerequisites	4-2
	4.1.2	Opening the SIMATIC Box PC 620	4-4
	4.1.3	Components Visible After Opening the Unit	4-5
	4.1.4	The Motherboard	4-6
	4.2	Installing Memory Expansion Submodules	4-8
	4.3	Replacing the Backup Battery	4-10
	4.4	Installation of Expansion Cards	4-12
	4.4.1	Removal and Installation of the Device for Holding Down the modules . .	4-14
	4.4.2	Removal and Installation of an Expansion Card	4-16
	4.5	Removal and Installation of Drives	4-17
	4.5.1	Removal and Installation of the Hard Disk Drive	4-17
	4.5.2	Removal and Installation of a CD ROM Drive	4-19
	4.5.3	Removal and Installation of the Floppy Drive	4-20
	4.5.4	Removal and Installation of the LS 240 Drive	4-21
	4.6	Removal and Installation of the Power Supply Unit	4-22
	4.7	Removal and Installation of the Bus Board	4-23
	4.8	Removal and Installation of the Motherboard	4-24
	4.9	Removal and Installation of the Device Fan	4-25
	4.10	Processor Change	4-26
	4.11	Reset Button	4-27

5	Configuring the SIMATIC Box PC 620		5-1
	5.1	Changing the Device Configuration with BIOS SETUP	5-2
	5.1.1	The Main Menu	5-5
	5.1.2	The Advanced Menu	5-15
	5.1.3	The Security Menu	5-22
	5.1.4	The Power Menu	5-24
	5.1.5	The Boot Sequence Menu	5-25
	5.1.6	The Version Menu	5-27
	5.1.7	The Exit Menu	5-28
	5.1.8	Default Setup Settings	5-29
	5.2	Configuring the PC Card	5-32
6	Error Diagnosis		6-1
	6.1	Problems When Using Modules from Other Manufacturers	6-2
	6.2	The Monitor Remains Dark	6-3
	6.3	The Screen Display Does not Appear or Drifts	6-4
	6.4	No Mouse Pointer Appears on the Screen	6-4
	6.5	The Clock Time and/or the Date in Your PC Is Incorrect	6-5
	6.6	USB-Device does not function	6-5
	6.7	An Error Message Appears on the Screen	6-6
	6.8	Diagnostic Messages (Port 80)	6-8

x	SIMATIC Box PC 620 Manual
	A5E00131465-01