Siemens Simatic Box PC 620 to PG Connection V.24, TTY, Interface Link Connecting Cable Adapter

Setting Up and Operating the SIMATIC Box PC 620

SIMATIC Box PC 620 to PG Connection (V.24, TTY)

If you want to connect your Box PC to another programming device, you can plug the appropriate connecting cable into the V.24 or TTY interface port

Tabelle 3-2	Connection of the SIMATIC Box PC 620 to other PUs
Interface		Link	Connecting Cable	Adapter
			Order No.:
COM 1 as a		with PG 7xx	6ES5 733-5BD202)
V.24 port
COM 1 as a		with PG 6xx	Series connection of	6ES5 731-6AG00
TTY port			6ES5 733 -2xxx02)
			and
			6ES5 731-6AG001)

Notice

1.When connecting the programming devices in series, make sure you connect the cable the right way around (see Figure 3-13).

2.The connecting cable is available for order only as a spare part. The connect- ing cable is described in Chapter 7.

3.The line current (TTY) is an optional product feature.

PG 7XX

	Adapter		Connecting cable
		Active		Passive PG 6XX
6ES5 731–6AG00		6ES5 733–2xxx0

Figure 3-13 Direction of Connection: Adapter – Connecting Cable

Notice

For the PC/PU connection, you must switch the TTY ports (COM 1) in one of the programmable logic controllers to passive by changing the jumper setting. When the Box PC leaves the factory, this interface is always set to active!

3-22	SIMATIC Box PC 620 Manual
	A5E00131465-01