Siemens 620 appendix Default Setup Settings, Documenting Your Device Configuration

Configuring the SIMATIC Box PC 620

5.1.8Default Setup Settings

Documenting Your Device Configuration

If you have made any modifications to the default Setup settings, you can enter them in the following table. You can then refer to these entries if you need to make any hardware modifications later.

Note

Print the following table out and keep the pages in a safe place once you have filled in your entries.

Systemparameter	Default Settings	YourEntries
Main
System Time	hh:mm:ss
System Date	MM/TT/JJJJ
Diskette A	1,44 MB, 3 1/2”
	bei LS 240: Disabled
Primary Master	C: 20496 MB
Primary Slave	None
Secondary Master	CD–ROM
Secondary Slave	None
Memory Cache	Write back
Boot Options
Quick Boot Mode	Enabled
SETUP prompt	Enabled
POST Errors	Enabled
Floppy check	Disabled
Summary screen	Enabled
Keyboard Features
Num Lock	On
Key Click	Disabled
Keyboard auto-repeat rate:	30/s
Keyboard auto-repeat delay	1/2s
Hardware Options
PCI-MPI/DP:	Enabled
On Board Ethernet	Enabled
Ethernet Adress	08000624xxxx
LAN remote boot	Disabled
Cardbus/PCMCIA Slot	Enabled
SafeCard Functions	Enabled
Legacy USB Support	Disabled

SIMATIC Box PC 620 Manual	5-29
A5E00131465-01