Setting Up and Operating the SIMATIC Box PC 620
Using a Mouse
You can connect both a
Connecting a PS/2 Mouse
You can connect an external PS/2 mouse or another external pointing device to an additional
Port for PS/2 mouse | COM 2 Port for serial mouse | USB connection for |
(socket) | (connector) | USB mouse (socket) |
Figure 3-8 Connecting the Mouse
To connect the mouse, proceed as follows:
1.Disconnect the PC from the power supply.
2.Plug the cable of the PS/2 mouse or another external pointing device into the mouse connector.
3.Connect the PC to the power supply.
Connecting a Serial Mouse
You can connect a serial mouse to the COM2 serial port. To operate a serial mouse, the appropriate mouse driver must be initialized and assigned parameters. You will find the information you need to do this in the description of your mouse or in the description of the operating system.
1.Disconnect the PC from the power supply.
2.Plug the serial mouse into the mouse connector labeled COM2.
3.Secure the connector with the screws.
4.Connect the PC to the power supply.
You can find out how to connect a USB mouse in “Connecting USB devices”.
SIMATIC Box PC 620 Manual | |
