
ConfiguringTitel chapterthe SIMATIC Box PC 620
5.1Changing the Device Configuration with BIOS SETUP
Changing the Device Configuration
Your Box PC device configuration is set for working with the software supplied with the unit. You should only change the preset values if you have modified your Box PC in any way or if a fault occurs when the unit is powered up.
BIOS SETUP Program
The SETUP program is in the
You can use SETUP to set the hardware configuration (for example, hard disk type) and define the system characteristics. You can also use SETUP to set the time of day and date.
Incorrect BIOS Data
If incorrect BIOS data are detected when you boot the system, the BIOS prompts you to
SStart BIOS SETUP by pressing F2 or
SContinue booting by pressing F1.
Starting SETUP
On completion of the startup test, the BIOS gives you the opportunity of starting the SETUP program by displaying the following screen prompt:
PRESS < F2 > to enter SETUP
To start SETUP, proceed as follows:
1.Reset your PC (warm or cold restart).
2.Press the F2 key as long as the BIOS prompt appears on the screen.
BIOS SETUP Menus
The various menus and submenus are listed on the following pages. You can get all the information you need for the SETUP entry selected from the
“Item Specific Help” part of the relevant menu.
SIMATIC Box PC 620 Manual | |